White Box Plans       s s         oooo    ououesby the Jolly Roger

Introduction:
----- A Alel
uouesThe White Box is simply a portable Touch-Tone keypad. For more
information on Touch-Tone, see my Silver Box Plans.
Materials:
----- A A
uo1 Touch-Tone Keypad
uo1 Miniatureo1000 to 8 Ohm Transformer
oues(Radio Shack # 273-1380)
uo1 Standard 8 Ohm Speaker
ou2 9V Batteries
ou2 9V Battery Clips

Procedure:
----- A A
(1) Connect the Red Wireofrom the Transformer to either terminal on the
Speaker.
(2) Connect the White Wireofrom the Transformer to the other terminal on
the Speaker.
(3) Connect the Red Wireofrom one Battery Clip to the Black Wireofrom the other
Battery Clip.
(4) Connect the Red Wireofrom the second Battery Clip to the Green Wire
from the Keypad.
(5) Connect the Blue Wireofrom the Keypad to the Orange/Black Wireofrom
the Keypad.
(6) Connect the Black Wireofrom the first Battery Clip to the two above
wires (Blue and Black/Orange).
(7) Connect the Black Wireofrom the Keypad to the Blue Wireofrom the
Transformer.
(8) Connect the Red/Green Wireofrom the Keypad to the Green Wireofrom the
Transformer.
(9) Make sureothe Black Wireofrom the Transformer and the remaining wires
from the Keypad areofree.
(10) Hook upothe Batteries.

Optional:
----- A 
(1) Put it all in a case.
(2) Add a Silver Box to it.

Use:
---
Just use it like a normal keypad, except put the speaker next to the
receiver of the phone you'reousing.

    s s         oooo    ououes----- A AleleleDDDDIOJolly Roger