%% 1,0:83 1,10:14 1,11:14 2,0:82 2,7:14 2,8:14 3,0:30 4,0:27 4,4:14 4,5:14 5,0:14 5,1:44 5,2:48 5,3:62 5,4:51 7,0:7 8,0:29 9,0:14 9,1:10 9,2:11 9,3:12 9,4:13 9,5:10 9,6:11 9,7:12 9,8:13 9,9:10 9,10:11 9,11:12 9,12:13 9,13:10 9,14:11 9,15:12 9,16:13 9,1:10 9,2:11 9,3:12 9,4:13 12,0:75 12,1:68 12,2:69 12,3:37 12,4:38 12,5:70 13,0:76 13,1:71 13,2:92 13,3:72 13,4:93 13,5:73 13,6:74 14,0:54 14,1:55 14,2:56 14,3:57 14,4:53 14,5:49 14,6:79 14,7:80 15,0:77 15,1:21 15,2:22 15,3:23 15,4:24 16,0:78 16,1:28 16,2:52 16,3:50 16,4:89 17,0:81 17,7:14 17,8:14 18,0:14 18,1:26 18,2:26 18,3:26 18,4:90 18,5:95 19,0:14 19,1:27 19,2:86 19,3:87 19,4:40 20,0:32 21,0:33 21,10:14 21,11:14 22,0:65 22,21:14 22,22:14 23,0:65 23,13:14 23,14:14 24,0:14 24,1:39 24,2:48 24,3:62 24,4:58 24,5:51 24,6:44 24,7:63 24,8:35 24,9:64 24,10:64 24,11:91 25,0:14 25,1:40 25,2:86 25,3:87 25,4:88 26,0:84 26,14:14 26,15:14 27,0:67 28,0:14 28,1:94 28,2:94 %% .1 System Level Help. ALT+O.........Move to OK Button. ALT+C.........Move to Cancel Button. ESC...........Backs Out of Any Screen or Function, or click on "Cancel" Button. Screen Not Recorded As Complete. F1............Help. F10...........Exits A Screen, or Click on "OK" Button, or ENTER on Last Field. Screen is Recorded as Being Completed. NUM-LOCK......Select Between Numbers & Arrow Cursor Keys. ENTER.........Accept Menu Choice. INSERT........Toggle Keyboard From Insert to Replace Mode. LEFT/RIGHT ARROW......Move Left or Right within Field. HOME..................First Field on Screen. END...................Last Field on Screen. DELETE................Delete Character at Cursor. BACKSPACE.............Delete Previous Character. SHIFT-PRINT SCREEN....Print Out Screen to Printer. ENTER, TAB, DOWN......Next Field on Screen. SHIFT-TAB, UP.........Previous Field on Screen. @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] .2 Key Assignments For This Field. To Change a Selection. First Press Space, a Screen will be Displayed With a Selection of Choices. Use Cursor Keys or First Letter to Select. Use Enter Key to Make Your choice. Before or After Selection Has Been Made... HOME.................First Choice. END..................Last Choice. ENTER................Select A Choice. DOWN.................Next Field on Screen. UP...................Previous Field on Screen. ESC..................Backs Out of menu. F1...................Help. With a Mouse and Mouse Cursor on the Field, Press the Left Mouse Button To Make a Selection. Move the Mouse Cursor to the Choice and Click the Left Mouse Button to Select it. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] .3 Key Assignments For This Field. SPACE................Toggle Choice. Y or y...............Select Yes. N or n...............Select No. ENTER, TAB, DOWN.....Next Field on Screen. SHIFT-TAB, UP........Previous Field on Screen. ALT+O................Move to OK Button. ALT+C................Move to Cancel Button. ESC..................Backs Out of Any Screen or Function, F1...................Help. F10..................Exits A Screen. With a Mouse Press Left Mouse Button with Mouse Cursor in this field toggles Choice Yes or No. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] .4 Key Assignments For This Field. This field Accepts Numbers, Only. 0-9 or -......Enter a Number. INSERT........Toggle Keyboard From Insert to Replace Mode. LEFT/RIGHT ARROW.......Move Left or Right within a Field. HOME...................First Field on screen. END....................Last Field on screen. DELETE.................Delete Character at Cursor. BACKSPACE..............Delete Previous Character. ENTER, TAB, DOWN.......Next Field on Screen. SHIFT-TAB, UP..........Previous Field on Screen. ALT+O..................Move to OK Button. ALT+C..................Move to Cancel Button. ESC....................Backs Out of Any Screen or Function. F1.....................Help. F10....................Exits A Screen. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] .5 Key Assignments For This Field. This field Accepts Any Letter, Number or Punctuation. INSERT.......Toggle Keyboard From Insert to Replace Mode. LEFT/RIGHT ARROW.....Move Left or Right within a Field. HOME.................First Field on Screen. END..................Last Field on Screen. DELETE...............Delete Character at Cursor. BACKSPACE............Delete Previous Character. ENTER, TAB, DOWN.....Next Field on Screen. SHIFT-TAB, UP........Previous Field on Screen. ALT+O................Move to OK Button. ALT+C................Move to Cancel Button. ESC..................Backs Out of Any Screen or Function or Press "Cancel". Screen Not Recorded As Complete. F1...................Help. F10..................Exits A Screen, or Press "OK". Screen is Recorded as Being Completed, or ENTER on Last Field. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] .6 Key Assignments For This Field. This field Accepts Any Letter, Number or Punctuation. You Can Scroll This Field Left or Right by Using the LEFT or RIGHT at the End of This Field. INSERT.......Toggle Keyboard From Insert to Replace Mode. LEFT/RIGHT ARROW.......Move Left or Right within a Field. HOME...................First Field on Screen. END....................Last Field on Screen. DELETE.................Delete Character at Cursor. BACKSPACE..............Delete Previous Character. ENTER, TAB, DOWN.......Next Field on Screen. SHIFT-TAB, UP..........Previous Field on Screen. ALT+O..................Move to OK Button. ALT+C..................Move to Cancel Button. ESC....................Backs Out of Any Screen or Function, or Press "Cancel". Screen Not Recorded As Complete. F1.....................Help. F10....................Exits A Screen, or press "OK". Screen is Recorded as Being Completed, or ENTER on Last Field. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] .7 Key Assignments For This Screen. You Can Also Enter the First Letter of a Choice. Either A Cap or Lower Case Letter Will Do. LEFT/RIGHT ARROW..........Move Left or Right a Field. HOME......................First Field on Screen. END.......................Last Field on Screen. ENTER.....................Accept Menu Choice. UP/DOWN...................Up or Down A Choice. If On A Multi-Page Popup Menu... PAGE-UP...................Scroll Up A Page. PAGE-DOWN.................Scroll Down A Page. ESC.......................Cancel. Leave Screen. F1........................Help. You Can Also Select a Choice by Pressing the Key Corresponding to the First Character in its Name. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] @20[MOUSE HELP FOR SCROLLING AND PAGING] .8 MS-DOS/PC-DOS Conventions. PRN:............Standard Printer. Either LPT1: or Other Device Setup With MODE Command. AUX:............Standard Auxiliary. Either COM1: or Other Device Setup With MODE Command. LPT1:-LPT4:.....Parallel Printers. COM1:-COM4:.....Communications Ports A: & B:.........First & Second Floppy Disk. C: & D:.........Either Ram Disk or First and Second Hard Disk Path............DISK:\FIRST\SECOND\LAST. A Path Made Up of Disk Letter Followed by a ':', Followed by a '\', and Other Directories Separated by '\'. File Name.......FILENAME.EXT. An 8 Character File Name, Followed by a '.' Followed by a 3 Character Extension. Combine with a Path for a Full File Name. NO Punctuation is Allowed in a File or Path Except as Noted Above. .9 Available Colors Available color choices available for Color Screens are: Black, Blue, Cyan, Green, Red, Magenta, Brown. Foreground colors can Blink, and can also be High Intensity. Note High Intensity Brown is Yellow. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .10 Background Color Choice These options allow you to select the General Background Color for a specific color setup which you can make. You can select any of the available color choices. Users of Monochrome Monitors should not change the colors setup. @9[AVAILABLE COLOR CHOICES] @2[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .11 Foreground Color Choice These options allow you to select the Foreground Color Choice for a specific color setup which you can make. You can select any of the available color choices. Users of Monochrome Monitors should not change the colors setup. @9[AVAILABLE COLOR CHOICES] @2[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .12 Select Bright Foreground Color? These options allow you to select whether the Foreground Color Choice is to be in High Intensity. You can choose Yes or No. Users of Monochrome Monitors should not change this Selection. @3[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .13 Select Blink Choice These options allow you to select whether the Foreground Color Blinks. Generally this Option is only used for Error Colors, but it can be used for Current Fields etc. You can choose Yes or No. Users of Monochrome Monitors should not change this Selection. @3[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .14 OK and Cancel Buttons. If you press the Enter key on the OK button or Click the mouse on it, it is the equivalent of pressing the F10 key. If you Press the Enter key on the Cancel Button or Click the Mouse on it, it is equivalent to pressing the ESC key. * If you want to move to the OK button press {ALT}+O. * If you want to move to the Cancel button press {ALT}+C. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .16 Global Macros and Other Keystrokes. Record a Macro. Press ALT+F5. Press the Key You want to Record a Macro for. Press the Keys you want to record. Press ALT+F5 to end. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .17 File Editor Keystrokes. ALT+F.........Search for String. ALT+R.........Search and Replace String. ALT+B.........Mark A Block "Row Wise" meaning In Vertical Rows and use again to end marking. ALT+C.........Mark A Block "Column Wise" meaning In Horizontal Rows and use again to end marking. Delete........Delete Marked Block. GREY-MINUS....Cut A Marked Block and Place on Clipboard. GREY-PLUS.....Copy A Marked Block to the Clipboard. F10...........Exit and Save file. ESC...........Exit and Abandon File (Don't Save). @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .18 Key Assignments For This Screen. HOME......................First Field on Screen. END.......................Last Field on Screen. ENTER.....................Accept Menu Choice. SPACE BAR.................Select or Deselect a choice. û will appear on all selected choices. Clicking The Field With a Mouse Has the Same Effect. UP/DOWN...................Up or Down A Choice. If On A Multi-Page Popup Menu... PAGE-UP...................Scroll Up A Page. PAGE-DOWN.................Scroll Down A Page. ESC.......................Cancel. Leave Screen (No Selections). F1........................Help. F10.......................(or Press on OK) Accept Selected Choices. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @16[MACROS HELP] @20[MOUSE HELP FOR SCROLLING AND PAGING] .19 System Wide Mouse Help. Press the Left Mouse Button on a field to move the selected field highlight to that field. Pressing the Left Mouse Button anywhere outside of a screen acts as though you had pressed ESC. @1[SYSTEM LEVEL HELP] @20[SCROLLING MOUSE FIELDS] .20 Scrolling Mouse Fields. In Any field of a Menu or Selection Screen in which you can Scroll, You can use the Mouse to move or scroll... If the screen has a "Scroll Light" arrow at the Top or Bottom of the screen, press the Left Mouse Button on the "Scroll Light" arrow. This has the same effect as pressing the appropriate Up or Down key on the keyboard. Moving the Mouse Cursor to a selection and pressing on it will select it. Pressing again on a selected field or choice will act as though you had pressed ENTER. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .21 Setup Screen Colors. This Menu Choice allows you to change the screen colors. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @7[KEYS AVAILABLE FOR THIS FIELD] .22 Setup Directories. This Menu Choice allows you to change directories used by the program. Also changed in this screen are the Printer Type, Printer Port and the Interrupt used by the TSR. If you use the /Ixx function when starting the TSR you must enter the interrupt you used here. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @7[KEYS AVAILABLE FOR THIS FIELD] .23 Setup Printer This Menu Choice allows you to change the basic printing defaults that the program uses when it prints. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @7[KEYS AVAILABLE FOR THIS FIELD] .24 Setup Word Processing Conversion. This Menu Choice allows you to change the basic Word Procssing conversions defaults that the program uses when it prints. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @7[KEYS AVAILABLE FOR THIS FIELD] .25 Setup Screen Colors Main Screen Color. This is the Main color used on the screens. If you select a bright color the Bright is Turned off while drawing the border. Highlight. These are the brighter highlights on the screen. Basic Field Color. These are the Fields where you enter information. Current Field Color. This is the field where the Cursor is Now. Error Color. This is the color that the Error Boxes Use. @10[BACKGROUND] @11[FOREGROUND] @12[BRIGHT] @13[BLINK] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .26 Get Default Directories. Data Directory. Where Printer Setup, Help, and Text Files are kept. Uses a subdirectory called DATA if it is found. i.e. C:\NUMERO\DATA User Directory. Where the Files that are created when you compile a chart are written. When you print a file to disk or convert a file to Word Processing it is by default saved here. Uses a subdirectory called USER if it is found. i.e. C:\NUMERO\USER @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @6[KEYS AVAILABLE FOR THIS FIELD] @8[MS-DOS CONVENTIONS] .27 File Name and Directory. DIRECTORY: This is the disk and directory. You can select by pressing the F2 Key. Once You select, You can select another directory by pressing F2 again. File Name: This is the File Name. If you have Wild Cards in the File Name Field Now, (i.e. * or ?) You can select by pressing the F2 Key. If You have a file name here and you press F2 you can verify that the file exists already. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @6[KEYS AVAILABLE FOR THIS FIELD] @8[MS-DOS CONVENTIONS] .28 DOS Shell. This Menu Choice Allows you to Goto DOS without leaving the program. Type EXIT and then ENTER to return to the program. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @7[KEYS AVAILABLE FOR THIS FIELD] .29 Quit. This Menu Choice Allows you to Exit the Program. All data you are working on is saved. @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] @7[KEYS AVAILABLE FOR THIS FIELD] .30 Text View Screen. ESC........Exit. PAGEDOWN...Scroll Down One Page. PAGEUP.....Scroll Up One Page. DOWN.......Scroll Down One Line. UP.........Scroll Up One Line. HOME.......Show First Page. END........Show Last Page. Press Mouse Left Button Down on a "Scroll Light" Arrow to Scroll up or Down a Line Press Mouse Left Button Down on a "Scroll Bar" and drag and release to scroll. Press Mouse Left Button Down Outside of Screen to Exit. @19[SYSTEM WIDE MOUSE HELP] @1[SYSTEM LEVEL HELP] @20[SCROLLING WITH MOUSE] .31 File Name or Device to Print To. If you leave this field blank, The Printer you specified earlier in the Printer Setup Screen is used. If you want to select a printer, Press the F3 key. This will show a list of common printer port, though you may not have a printer at any one of these ports. You can press F2 also to select a file to print to. @19[SYSTEM WIDE MOUSE HELP] @1[SYSTEM LEVEL HELP] @6[KEYS AVAILABLE FOR THIS FIELD] @8[MS-DOS CONVENTIONS] .32 Pick Font. Using this screen, you can pick a font from the selection that Numero Uno supports. Press Enter to select a Font. @7[KEYS AVAILABLE FOR THIS FIELD] @19[SYSTEM WIDE MOUSE HELP] @1[SYSTEM LEVEL HELP] .33 Customize Font Info. This screen allows you to use custom downloaded fonts and modify font setup information to support fonts Numero Uno doesn't recognize. Font Name. This is the Name of the font. It is for your information only and Numero Uno doesn't use it. Family. This is the font family number that is used to select the font. Pitch. This is -1 for a proportional font or the closest whole pitch for the font. Size. This is the size of the font. It must be a size that this font has or supports. Numero Uno doesn't scale fonts. Symbol Set. This is either the symbol set that FontInfo gives you or 12 indication you are specifying a symbol set below. Symbol Set Name. This is the technical name for the symbol set. It must end in a capital letter. Regular Weight. This is a value given by FontInfo. It is usually 0 for a regular font, -1 for a light font. Bold Weight. This is not used by Numero Uno at this time but is usually 3 or 4 greater than Regular Weight. Average Character Width (Decipoints). This is the average character width of generally lowercase letters. This is measured in tenths of a point (1/72") or 1/720s" @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .33 OK and Cancel Buttons. If you press the Enter key on the OK button or Click the mouse on it, it is the equivalent of pressing the F10 key. If you Press the Enter key on the Cancel Button or Click the Mouse on it, it is equivalent to pressing the ESC key. * If you want to move to the OK button press {ALT}+O. * If you want to move to the Cancel button press {ALT}+C. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .34 Enter A File Name. Enter A file Name Here. If You enter a file name without a drive or path attached to the name, a default drive and directory will be used. @5[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .35 End Line With. This selects how line are ended on your printer. If Your printer Adds a Line Feed to every Carriage Return, this should be "Carriage Return Only". If Your printer does not this should be "Carriage Return + Line Feed". For Many Printers the default setting of "Line Feed Only" works as many printers add a carriage return to a single line feed. If your printouts come out jumbled try changing this field. @2[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .36 Word Processor Conversion Setup. Use this function to enter information about converting Numero Uno files to ASCII or to other word processing formats. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .37 Save Data To Disk. This function allows you to name a file to save all the Data entered in these menus to. This allows you to save the data you have entered for a future time. If you don't enter a disk or directory, it will be saved to your User disk and Directory. If you save to a file N1DAT.DEF, this file will be read Every time Numero Uno starts up. Numero Uno saves the contents of the screens to the File N1DAT.HIS when you quit, and reloads it when you startup again. This is overridden by N1DAT.DEF which takes priority if it exists. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .38 Load Saved Data. This function allows you to name a previously saved file and load it into memory. This loads data into all the screens. If you don't specify a disk or directory, the file is read from your User Disk and Directory. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .39 Printer Type. This Selects the type of printer that you are using. This can either be an Epson or IBM compatible dot matrix printer, or HP LaserJet, DeskJet or Compatible Printer. This field will also update the control strings below as well. This can also be Generic Printer. Generic Printer is used for other printers which you don't know control codes for. If You don't know the codes or don't understand how they work, use Generic. Try to pick the printer that most closely matches your printer. These printer choices have many printer options you can select. If you have Publisher's Powerpak installed you can choose this driver. @2[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .40 File Format. This Selects the type of conversion that is done for converting a file. This can be either Plain ASCII, Smart formatted ASCII, WordStar 3.x, WordStar 4.x, WordPerfect 4.x, WordPerfect 5.x, XYWrite or Microsoft Word (RTF Format). Smart formatted ASCII uses the ASCII conversion control strings. @2[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .41 Setup For Printing. This function allows you setup your printer, ASCII and word processing conversions. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .42 Laser Setup Parameters. Font Name. This is the Name of the Font either cartridge, internal or soft-font. Press F2 to Select from choices of fonts that may be available. You must own this font or it must come with your printer. Numero Uno Provides no fonts. This font should also have a bold version in this size and symbol set as well. This updates all the other fields in this group. Size. Set the size of the font you want to use. This must be a size of this font that you own. Symbol Set To Use. Use this field to select the proper Symbol Set for the font you need to use. Symbol Set Name. This field has the actual name used to specify the Symbol Set when the font is specified to the printer. When The Symbol set is changed this field is updated. Use this field to enter a symbol set type which is not in the list of symbol sets. Set the Symbol Set field to be "Other Specify -->" @2[KEYS AVAILABLE FOR THIS FIELD] @19[SYSTEM WIDE MOUSE HELP] @5[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] .43 Printer Setup. This function allows you to customize Printer for printing out text charts. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .44 Printing Device. NOTE: Leave this Field BLANK To Use Standard Printer. Enter the device commonly used for printing in this field. If you are using the standard system printer device PRN: leave this field blank and this will be assumed. If you wish to use your second printer LPT2:, you can enter this here. This becomes your default printer. In this field do no enter the trailing ':' that follows the device name. Do Not enter a Disk Name here as this is for printing devices only. If you save your printouts to disk before printing, just leave this field blank. For Example--Second Printer Port: LPT2 @6[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @8[DOS-CONVENTIONS] @19[SYSTEM WIDE MOUSE HELP] .45 ASCII Conversion Replacement Strings. When Numero Uno converts a file to Smart Pseudo formatted ASCII text, Numero Uno converts the indications in the file for Head, Bold, Underscore, End of Head, End of Bold, and End of Underscore to these strings. You can change these if you wish. If you don't want any bold for example, just leave these fields blank. Anything you enter into these fields must be typeable on the keyboard. You may not enter printer string as you do with the printer file setup, as they will not be converted by Numero Uno, as they are for printers. If your word processor does have printer codes and formatting conventions, you can use these. @6[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .46 Printer Conversion Strings. Press F2 to select a number of options that your printer can support. When you Press OK or Hit the F10 key the options you select will be used to create the strings you want. When Numero Uno prints a file out on your printer or file, Numero Uno converts the indications in the file for Heading, Bold, Underscore, End of Heading, End of Bold, and End of Underscore to these strings. You can change these if you wish. If you don't want any bold for example, just leave these fields blank. These fields allow you to enter a custom printer control strings to control your printer's output. These fields default to standard IBM Proprinter and Epson standard codes. This can be any valid printer string Enter non-typeable ascii codes by entering the decimal value for that code in '<' and '>' type brackets. An ascii value can range between 0 and 255. Note the ascii value for the ESC character is 27. Note each code you enter in '<' and '>' becomes one character long when translated, i.e. <27> becomes chr(27) or the escape character. @6[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .48 Text Width For Printer. Enter the width of the Printed output in inches. The width can be between 4" and 16" in width. Common Fractions: 1/8--.13, 3/16--.19, 1/4--.25, 3/8--.38, 7/16--.42 1/2--.50, 5/8--.63, 3/4--.75, 7/8--.88 @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .49 Edit File List Entry. Use this function to Edit an entry in the file list, that you had compiled earlier, and perhaps you now want to put a more exact comment onto it. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .50 Scan For Files Not in List. With this version of Numero Uno, you can archive files from the list off to another floppy, or disk. To do this copy the file onto another disk and kill the file from the View-Print menu. When you need the file again, copy the file back to your User directory, and select this function. This will only work for files generated by Numero Uno Version 2.25 or greater since Numero Uno as of this version stores file information in each file, and the previous version did not. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .51 Print Header on First Page. If you answer Yes, then a header will be printed on the first page of this report. If you answer No then no header will be printed. @3[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .52 Sort File Listing. This function allows you to sort alphabetically the file list. If you keep files around for several different sessions and delete files you may need to use this utility to reorganize your files. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .53 Kill File in File List Use this function to delete a file from the file list. A file list is created whenever you start Numero Uno and a record of every file created when you compile a Numerological chart. This file and the files it contains can be saved when you quit. You may wish to delete files, if you do not have much room on your disk, etc. Unless you do not tell Numero Uno Not To the file list is entirely erased along with its contents when this program end. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .54 View/Print Files These functions allow you to view Numero Uno files, convert to ascii text, printout, and view the interactive calendar display. You can also selectively delete files in the file list which you don't need, and edit the file information in this list. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] .55 View Numero Uno File Use this function to view an Numero Uno Output File that was created by compiling a chart. This function allows you to select a file and view it by scrolling through the file like you would with a word processor. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .56 Print Numero Uno File Use this function to print out an Numero Uno Output file. The file can be printed to Disk (for later printing) or printed out to any logical device, but the function defaults to the PRN: Device. Using this function, you select a file and then you can select how the file is printed. You can set the left margin, text width, destination, and whether the file is opened or appended to an already existing one. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .57 Convert Numero Uno File To Ascii Text Use this function to convert a file to an ascii text file for word processing or telecommunications. Though you could do this with a file from the printout function, this will not print out any unprintable characters to the file, making it easy to edit. Using this function, you select a file and then you can select how the file is printed. You can set the text width, destination, and whether the file is opened or appended to an already existing one. You can convert a file to a number of word processing formats including: WordStar 3.x, WordStar 4.x and up, WordPerfect 4.x, WordPerfect 5.x, Microsoft Word "Rich Text" (RFT) format, XYWrite, and Ascii. Most of these can preserve formatting information for editing. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .58 Number of Lines Per Page. This option allows you to choose the number of text lines, including the header information which will be printed on each page when printing out a report. If you are using 11" paper and do not choose to change the printer spacing, you should not have to change this option. Your selection can range between 30 - 99. @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .59 Printer Control String. This option allows you to enter a custom printer control string to setup your printer for output. This can be any valid printer string Enter non-typeable ascii codes by entering the decimal value for that code in '<' and '>' type brackets. An ascii value can range between 0 and 255. NOTE: The ascii value for the ESC character is 27. This choice scrolls allowing you to enter a 75 character long setup string. Note each code you enter in '<' and '>' becomes one character long when translated. @6[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @60[EPSON PRINTER CODES] @61[IBM PRO-PRINTER CODES] @19[SYSTEM WIDE MOUSE HELP] .60 EPSON Printer Codes Here are some of the more useful printer codes, n indicates a number. Note that You don't require codes for margin or width because that is done within Numero Uno, by your control. NLQ Mode <27>x<1> Compressed Mode <15> Elite Pitch <27>M Pica Pitch <27> P Master Select <27>! 1/8" Spacing <27>0 7/72" Spacing <27>1 1/6" Spacing <27>2 n/216" Spac. <27>3 n/72" Sp. <27>A Form Feed <12> Page Len Lines <27>C Prop. Mode <27><1> NLQ <27>x<1> Page Length Inches Draft Mode <27>C<0> .61 IBM Pro-Printer Codes Here are some of the more useful printer codes, n indicates a number Note that You don't require codes for margin or width because that is done within Numero Uno, by your control. Compressed Mode <15> 1/8" Spacing <27>0 7/72" Spacing <27>1 n/216" Spac. <27>3 n/72" Sp. <27>A Execute Spacing <27>2 Form Feed <12> Page Len Lines <27>C Page Length Inches <27>C<0> .62 Left Margin For Printer. Enter the Left margin of the Printed output in inches. The Left margin can be between 0" and 4" in width. Common Fractions: 1/8--.13, 3/16--.19, 1/4--.25, 3/8--.38, 7/16--.42 1/2--.50, 5/8--.63, 3/4--.75, 7/8--.88 @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .63 Center Heads Do You want Main Heads to be Centered. @3[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .64 Control Strings. Laser/Ink Jet Setup. If you have a printer set up which support these options, you can setup additional data such as the font in these screens. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .65 Font Types. There are several different Fonts used By Numero Uno. You can customize any one by pressing the Key Listed at the end of the listing for that. Main Text Font. This is the Body Text used. To Customize Press->@a[0x1f](F3)@a[0] Heading Font. This is a Main Heading. Usually Bold and Centered. @a[0x1f](F4)@a[0] Big Calendar Font. This is the Font used for the numbers in the top left corner of each calendar cell. If your printer has fonts with larger sizes, select a font with a larger size here. @a[0x1f](F5)@a[0] Small Calendar Font. This is the font for the small number in the bottom right of each calendar cell. this is usually the same as the Main Text Font but can be different. @a[0x1f](F6)@a[0] Fixed Pitch Font. This is usually Courier, but can be changed to a different pitch for example you could use a 12 pitch font and make the calendars narrower. This is used to print the rules, lines and the Calendar Grid. This must be a PC-8 font for a laser Printer. @a[0x1f](F7)@a[0] @42[FONT SPECIFICATION FIELDS] .65 Control String Types. Printer Control String. This is output once at the top of each report. Heading On/Off String. This is the code string for the main headings. It usually turns on or off Bold and Underscored text. Bold On/Off String. Emphasizes text. Underline On/Off String. Turns on the Underline of Italic function. Fixed Pitch Font String. This string turns off any Double Height Double width function that may be used in a calendar. This must guarantee a fixed pitch font. @66[CONTINUES] @46[ENTERING STRINGS] .66 Control String Types. Large Font String. This string turns on a large font for the calendar. Generally 24 pin printers are able to do this correctly. Older 9 pin printers have trouble with this. If you are using a laser or ink jet. See the Laser/ink Jet Screen. Small Font String. this turns off the large font and turns on the smaller calendar font. Page Break String. This is output after the page break is output. Start/End Calendar String. This usually puts the printer in or takes the printer out of Unidirectional mode. @46[ENTERING STRINGS] .67 Interactive Calendar Screen. By pressing certain keys, you can activate parts of this scree and change it. Press Enter on any Selected Field will print out text for that day. Press ALT+M Shows material on the Month. Press ALT+Y Shows material on the Year. PAGE-UP shows Previous Month. PAGE-DOWN shows Next Month. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .68 Chart Info Choose this choice to enter the Birth Date and names of the person you wish to analyze. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .69 Calendar Data. Choose this choice to enter the Start and End Dates for the Personal or Universal Calendar. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .70 Clear Info. Choose this choice to Clear out the Data screens. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .71 Compile Personality Report. Choose this choice to Compile a report based on Date of Birth, and the letters in the name. This report includes interpreted text for most of the important elements of the report @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .72 Compile Transits Report. Choose this choice to Compile a report based on each individual, letters in your name and the order in which they occur related to the year in which they will effect you. This report includes interpreted text for most of the important elements of the report @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .73 Compile Personal Calendar Report. Choose this choice to Compile a Personal Calendar Based on your birth date. Shows your Personal Day for each day of the month and Personal month and year info. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .74 Compile Universal Calendar Report. Choose this choice to Compile a Universal Calendar Based on the Dates involved. Shows your Universal Day for each day of the month and Universal month and year info. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .75 Enter/Edit. This menu is used to enter data into the program, load and save that data. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .76 Compile Chart. This menu is used to compile charts before you can view them. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .77 Options. This menu is used to change the Options that the program uses. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .78 Utilities. This menu is used to select various utility functions. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .79 View Personal Calendar Screen. If you choose this menu choice, you will be able to view a Personal calendar screen that you can interactively view. You can skip from one month to another and view the text associated with the month, year and various day numbers. These are different from the calendars that can be compiled and printed. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .80 View Universal Calendar Screen. If you choose this menu choice, you will be able to view a Universal calendar screen that you can interactively view. You can skip from one month to another and view the text associated with the month, year and various day numbers. These are different from the calendars that can be compiled and printed. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .81 Calendar Data. This screen Sets initial data for the Interactive Calendars. The Birth Date is the Birth date is only used for Personal calendars. The Starting Date is the initial date that the calendar is setup for. You can scroll through different months using the Page-Up and Page-Down keys. @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .82 Range of Calendars. When Calendars are Compiled for Printing or Conversion, a number of them can be compiled at one time. This allows you to set the range. @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .83 Chart Info. In this screen enter the information of the person you wish to analyze. Name at Birth. This should be the given name from the Christening or Birth Certificate. Use the full name and not initials. If the person's sur-name has changed, use the original sur-name at birth. Name Being Used Now. This can be any name that the person is currrently known by or was known by at the time you wanted to do an analysis. If the sur-name has changed use the new sur-name. Birth Date. Enter the Date of Birth here. Street Address. An Analysis is done of the numbers of the street address to see if the location is agreeable. @4[KEYS FOR 1-9 FIELD] @5[KEYS FOR LETTER FIELD] @19[SYSTEM WIDE MOUSE HELP] @1[SYSTEM LEVEL HELP] .84 Control String Types. Printer Control String. This is output once at the top of each report. Heading On/Off String. This is the code string for the main headings. It usually turns on or off Bold and Underscored text. Bold On/Off String. Emphasizes text. Underline On/Off String. Turns on the Underline of Italic function. Fixed Pitch Font String. This string turns off any Double Height Double width function that may be used in a calendar. This must guarantee a fixed pitch font. @86[CONTINUES] @45[ENTERING STRINGS] .85 Control String Types. Large Font String. This string turns on a large font for the calendar. Generally 24 pin printers are able to do this correctly. Older 9 pin printers have trouble with this. If you are using a laser or ink jet. See the Laser/ink Jet Screen. Small Font String. this turns off the large font and turns on the smaller calendar font. Page Break String. This is output after the page break is output. Start/End Calendar String. This usually puts the printer in or takes the printer out of Unidirectional mode. @45[ENTERING STRINGS] .86 Text Width For Word Processing Conversion. Enter the width of the Output in inches. The width can be between 4" and 16" in width. Common Fractions: 1/8--.13, 3/16--.19, 1/4--.25, 3/8--.38, 7/16--.42 1/2--.50, 5/8--.63, 3/4--.75, 7/8--.88 @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .87 Left Margin For Word Processing Conversion. Enter the Left margin of the Output in inches. The Left margin can be between 0" and 4" in width. Common Fractions: 1/8--.13, 3/16--.19, 1/4--.25, 3/8--.38, 7/16--.42 1/2--.50, 5/8--.63, 3/4--.75, 7/8--.88 @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .88 Control Strings. The Coded ASCII conversion uses the fields that this screen accesses to code the output where various functions take place. This can be used to customize this program for a word processor that it does not support yet. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .89 Read File Into Birth Data. This menu choice allows you to read the data in a Text Report file and put the data back into the birth screens. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .90 Calendar Grid File. You can customize this file or provide your own file providing it is in the same format as the files provided with this program are in. @6[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .91 Color Printer Color Scheme. If you are printing with a color printer and have selected a color printing driver this field will select the color scheme for printing the calendars. The First color is the color for the Numerological number which may print large on your number, and the second color is the color for the actual date. @2[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .92 Compile Numeric Report. Choose this choice to Compile a report based on Date of Birth, and the letters in the name. This only has the data and is not interpreted. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .93 Compile Numeric Transits Report. Choose this choice to Compile a report based on each individual, letter in a name and the order in which they occur related to the year in which they will effect you. This is only the data and is not interpreted. @7[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .94 Years for Transits Report. This screen selects the years that you want to show for your transits report. This can range from your birth year to 120 years after your birth. @4[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .95 Count W and Y as Vowels when Preceded by Vowels? Some Numerologists believe that W and Y should always be counted as consonants when calculating Inner Self and Motivation Numbers. Some believe that W and Y are vowels when preceeded by a vowel such as in "OY" or "EW". @3[KEYS AVAILABLE FOR THIS FIELD] @1[SYSTEM LEVEL HELP] @19[SYSTEM WIDE MOUSE HELP] .end