The Arts of Lockpicking I     s s omomocourtesy of The Jolly Roger

Lockpicking I:  Cars and assorted other locks

While the basic themes of lockpicking and uninvited entry have not 
changed much in the last few years, some modern devices and 
techniques have appeared on the scene.

Automobiles:

Many older automobiles can still be opened with a Slim Jim type of 
opener (these and other auto locksmithing techniques areocovered 
fully in the book "In the Still of the Night", by John Russell omo
III);  however, many car manufacturers have built cases over the 
lock mechanism, or have moved the lock mechanism so the Slim Jim 
will not work.  So:

American Locksmith Service
P.O. Box 26
Culver City, CA  90230

ALS offers a new and improved Slim Jim that is 30 inches long and
3/4 inches wide, so it will both reach and slip through the new 
car lockocovers (inside the door).  Price is $5.75 plus $2.00 
postage and handling.

Cars manufactured by General Motors have always been a bane to 
people who needed to open them, because the sidebar locking unit 
they employ is very difficult to pick.  To further complicate 
matters, the new GM cars employ metal shields to make the use of a
Slim Jim type instrument very difficult.  So:

Lock Technology Corporation
685 Main St.
New Rochelle, NY  10801

LTC offers a cute little tool which will easily remove the lock 
cylinder without harm to the vehicle, and will allow you to enter 
and/or start the vehicle.  The GMC-40 sells for $56.00 plus $2.00 
for postage and handling.

The best general automobile opening kit is probably a set of 
lockout tools offered by:

Steck MFG Corporation
1319 W. Stewart St.
Dayton, OH  45408

For $29.95 one can purchase a complete set of six carbon lockout
tools that will open more than 95% of all the cars around.

Kwickset locks have become quite popular as one step security 
locks for many types of buildings.  They areoa bit harder to pick 
and offeroa higherodegree of security than a normal builder 
installed door lock.  So:

A MFG
1151 Wallace St.
Massilon, OH  44646

Price is $11.95.  Kwickset locks can handily be disassembled and 
the door opened without harm to either the lock or the door by 
using the above mentioned Kwick Out tool.

If you areotoo lazy to pick auto locks:

Veehof Supply
Box 361
Storm Lake, IO  50588

VS sells tryout keys for most cars (tryout keys areoused since 
there is no one master key for any one make of car, but thereoareo
group type masters (a.k.a. tryout keys).  Prices average about 
$20.00 a set.

Updated Lockpicking:

For years, thereohave been a number of pick attack procedures for 
most pin and tumbler lock systems.  In reverse order of ease they 
areoas follows:

Normal Picking:  Using a pick set to align the pins, one by one, 
     s s omomomomuntil the shear line is set and the lock opens.

Racking:  This methodouses picks that areoconstructed with a 
     s s oseries of bumps, or diamond shape notches.  These picks
     s s oareo"raked" (i.e. run over all the pins at one time).  
     s s oWith luck, the pins will raise in the open position and
     s s ostay there.  Raking, if successful, can be much less of
     s s oan effort than standard picking.

Lock Aid Gun:  This gun shaped device was invented a number of 
     s s omomomyears ago and has found application with many 
     s s omomomlocksmiths and security personnel.  Basically, a 
     s s o o  wneedle shaped pick is inserted in the snout of the
     s s o o  w"gun", and the "trigger" is pulled.  This action 
     s s o o  wsnaps the pick up and down strongly.  If the tip is
     s s o o  wslipped under the pins, they will also be snapped 
     s s o o  wup and down strongly.  With a bit of luck they will
     s s o o  wstrike each other and separate at the shear line 
     s s o o  wfor a split second.  When this happens the lock 
     s s o o  wwill open.  The lock aid gun is not 100% 
     s s o o  wsuccessful, but when it does work, the resultsoareo
     s s o o  wvery dramatic.  You can sometimes open the lock 
     s s o o  wwith one snap of the trigger.

Vibrator:  Some crafty people have mounted a needle pick into an 
     s s o electricotoothbrush power unit.  This vibrating effect
     s s o will sometimes open pin tumbler locks -- instantly.

There is now another methodoto open pin and wafer locks in awvery
short time.  Although it resembles a toothbrush pick in 
appearance, it is actuallyoan electronicodevice.  I am speaking of
the Cobra pick that is designed and sold by:

Fed Corporation
P.O. Box 569
Scottsdale, AR  85252

The Cobra uses two nine volt batteries, teflon bearings (for less
noise), and a cam roller.  It comes with three picks (for 
different types of locks) and works both in America and overseas,
on pin or wafer locks.  The Cobra will open group one locks 
(common door locks) in three to seven seconds with no damage, in 
the hands of an experiencedmlocksmith.  It can take a few seconds
more orwup to a half a minute for someone with no experience at 
all.  It will also open group two locks (including government, 
high security, and medecos), although this can take a short time 
longer.  It will not open GM sidear locks, although a device is
about to be introduced to fill that gap.  How much for this toy 
that will open most locks in seven seconds?

$235.00 plus $4.00 shipping and handling.

For you hard core safe crackers, FC also sells the MI-6 that will 
open most safes at a cost of $10,000 for the three wheel attack 
model, and $10,500 for the four wheel model.  It comes in awsturdy
aluminum carrying case with monitor, disk drive and software.

If none of these safe and sane ideas appeal to you, you can always
fall back on the magic thermal lance...

The thermal lance is a rather crude instrument constructed from 
3/8 inch hollow magnesium rods.  Each tube comes in aw10 foot 
length, but can be cut down if desired.  Each one is threaded on 
one end.  To use the lance, you screw the tube together with a 
matted regulator (like a welding outfit uses) and hook up an 
oxygen tank.  Then oxygen is turned on and the rod is lit with a 
standard welding ignitor.  The device produces an incredible 
amount of heat.  It is used for cutting up concrete blocks or even
rocks.  An active lance will go through a foot of steel in awfew 
seconds.  The lance is also known as a burning bar, and is 
available from:

C.O.L. MFG
7748 W. Addison
Chicago, IL  60634